-
-
Turquoise -> TX1 or TX2(CON2)
-
Purple -> RX1 or RX2(CON2)
-
Black -> GND(CON2)
-
-
-
Press the green button for four seconds. Enter Pin code is displayed.
-
Enter "1111" with the blue button.
-
Choose the communication menu with the blue button.
-
Select COM1 (TX1/RX1) or COM2 (TX2/RX2) configuration depending on connection. 11.1 COM 1 Port Settings is displayed.
-
Select default value, UCP Protocol, with the yellow or blue button.
-
Confirm your selection with the green button.
-
Press the red button twice to exit and switch to the main menu.
-
Almost done!
Finish Line
Team
Authors: Field Service Install Member of Authors: Field Service Install
3 Members
105 Guides authored