IOX-USB

For features, technical specs, and troubleshooting, see the IOX-USB Support Document.

fig. 2

The IOX comes with a termination shunt installed in the expansion port. _{(fig. 2)}If you plan to install more than one IOX in a daisy chain, you must remove the shunt from each device in the line, with the exception of the last IOX connected. The shunt must remain in the last IOX and secured with a cable tie.

The shunt in the last IOX device ensures the GO device detects and configures the IOX, as effectively as possible.

✱ NOTE: Failing to install the shunt in the last IOX could affect IOX communication. It is recommended that you secure the shunt using a cable tie if not already done.

The IOX-USBPWRF/M, IOX-USBF/M, and IOX-USB cannot be used together on the same GO device.

After the IOX-USB is installed and connected in the Drive App, the Drive App skips the vehicle selection process and automatically assigns the connected vehicle to the user.

If you are assigned to a vehicle but choose to connect an IOX-USB with a different telematics device, you are assigned to the vehicle connected via IOX-USB. Upon successful assignment, the App displays a green popup notification message. If you are already assigned to a vehicle that is also connected to an IOX-USB, no message is displayed.