Support
For features, technical specs, and troubleshooting, see the IOX-UREADER Support Document.
Best Practices
Connecting Additional IOXs to an IOX-UREADER
When connecting additional IOXs to an IOX-UREADER, ensure the USB connector is seated correctly and secure the connection with a cable tie. (fig. 1)
fig. 1
Termination Shunt
fig. 2
The IOX comes with a termination shunt installed in the expansion port. (fig. 2)If you plan to install more than one IOX in a daisy chain, you must remove the shunt from each device in the line, with the exception of the last IOX connected. The shunt must remain in the last IOX and secured with a cable tie.
The shunt in the last IOX device ensures the GO device detects and configures the IOX, as effectively as possible.
✱ NOTE: Failing to install the shunt in the last IOX could affect IOX communication. It is recommended that you secure the shunt using a cable tie if not already done.