IOX-NFCREADERA

For features, technical specs, and troubleshooting, see the IOX-NFCREADERA Support Document.

When connecting additional IOXs to an IOX-NFCREADERA, ensure the USB connector is seated correctly and secure the connection with a cable tie. _{(fig. 1)}

fig. 1

fig. 2

The IOX comes with a termination shunt installed in the expansion port. _{(fig. 2)}If you plan to install more than one IOX in a daisy chain, you must remove the shunt from each device in the line, with the exception of the last IOX connected. The shunt must remain in the last IOX and secured with a cable tie.

The shunt in the last IOX device ensures the GO device detects and configures the IOX, as effectively as possible.

✱ NOTE: Failing to install the shunt in the last IOX could affect IOX communication. It is recommended that you secure the shunt using a cable tie if not already done.

✱ NOTE: Requires Professional Installation — To install a Driver ID Relay in conjunction with the IOX-NFCREADERA, please review the instructions in the SPR-RELAYKIT Install document.

The IOX-NFCREADERA cannot be used in conjunction with the * IOX-HID (Discontinued).