Skip to main content

v2.5

Minor Versionm

by Jason Fox

Video Overview

  1. Rexroth supplied CS550 CS660 GPS/AVL cable from control head to Primary Port required. Part Number 987376776 - requires M/F null adapter. Part Number 987480240 - requires M/F null adapter.
    • Rexroth supplied CS550 CS660 GPS/AVL cable from control head to Primary Port required.

    • Part Number 987376776 - requires M/F null adapter.

    • Part Number 987480240 - requires M/F null adapter.

    • Part Number 987400008 - no null required

  2. ACC port varies by model/hardware On the Rexroth cable, use port labelled GPS or AVL  to connect to the IOX-WRKS primary port. Use HRN-DB9SI15 if additional length is required.
    • ACC port varies by model/hardware

    • On the Rexroth cable, use port labelled GPS or AVL to connect to the IOX-WRKS primary port.

    • Use HRN-DB9SI15 if additional length is required.

  3. From the main screen of the CS660, insert the programming key into one of the USB ports of the control head. Wait about 10 seconds, then press the lock symbol icon. On the Configuration screen scroll down and select IoT Tracking
    • From the main screen of the CS660, insert the programming key into one of the USB ports of the control head.

    • Wait about 10 seconds, then press the lock symbol icon.

    • On the Configuration screen scroll down and select IoT Tracking

    • Press the Exit button door icon in the bottom left to return to the main screen.

    • Confirm setup by ensuring IoT is visible on the screen.

    • Ensure the IOX-WRKS has the correct controller configuration loaded before proceeding to verification / simulation mode.

  4. Placing the CS660 in ground speed simulation - Press and hold the speed icon for 5 seconds.
    • Placing the CS660 in ground speed simulation - Press and hold the speed icon for 5 seconds.

    • Adjust speed Up and Down

    • Set the material and rates on the screen to a desired setting

    • Verify data flow.

    • When test is complete, return speed to zero using the down arrow.

    • Never leave a controller in simulation mode!

Finish Line

Jason Fox

Member since: 09/14/2023

31 Guides authored

Team

Field Service Specialists Member of Field Service Specialists

8 Members

73 Guides authored