v0.8

Minor Versionm

by Jason Fox

IOX-BATTERY Prerequisite Guide

Written By: Ezequiel Montalvo (and 3 other contributors)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Sections

1

    • Before starting the installation, ensure the Geotab GO device is unplugged from the vehicle.

    • The IOX-BATTERY can be daisy-chained with other IOXs, but it MUST be first in the chain to allow maximum runtime on the GO device.

  2. To add any additional IOX accessories, remove the Termination Shunt. Use the included cable tie to secure the connection. To add any additional IOX accessories, remove the Termination Shunt. Use the included cable tie to secure the connection.

    • To add any additional IOX accessories, remove the Termination Shunt. Use the included cable tie to secure the connection.

  3. Mount the IOX-BATTERY using the provided screws or cable ties in a location on the vehicle away from outside elements. The IOX-BATTERY charges when the engine is running. The blue LED light illuminates when charging.

    • Mount the IOX-BATTERY using the provided screws or cable ties in a location on the vehicle away from outside elements. The IOX-BATTERY charges when the engine is running. The blue LED light illuminates when charging.

Finish Line

Author

with 3 other contributors

Ezequiel Montalvo

Member since: 09/08/2022

12 Guides authored

Team

Field Service Specialists Member of Field Service Specialists

8 Members

128 Guides authored