v1.5

Minor Versionm

by Ezequiel Montalvo

IOX-ALERT Prerequisite

Written By: Ezequiel Montalvo (and 2 other contributors)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Sections

1

    • Before starting the installation, ensure the Geotab GO device is unplugged from the vehicle.

  2. The IOX-ALERT has a black wire that must be connected to an external trigger button. The wire can either be connected to a momentary contact or on/off toggle switch.

    • The IOX-ALERT has a black wire that must be connected to an external trigger button. The wire can either be connected to a momentary contact or on/off toggle switch.

  3. Connect an external wire from the switch to vehicle ground.

    • Connect an external wire from the switch to vehicle ground.

    • The wire and the ring terminal are not included in the IOX-ALERT kit and must be supplied by the installer.

Finish Line

One other person completed this guide.

Author

with 2 other contributors

Ezequiel Montalvo

Member since: 09/08/2022

12 Guides authored

Team

Field Service Specialists Member of Field Service Specialists

8 Members

93 Guides authored