Epoke X1

The IOX-WRKS primary port connects to the serial port on the Epoke X1 using the standard DB9 Straight Through cable HRN-DB9SI15.

Press the [Menu] button located in the top left corner.

Press the [Settings] button.

Select [Login] from the [Settings] screen.

Click on the first orange box to login to the Epoke X1.

Use the on screen keypad to enter in the login, password and pin number below:

Login: epokena

Password: 4218

PIN #: 1132

After successfully logging in, return back to the [Settings] screen.

From the settings screen, navigate to [Spreader Settings > Advanced > Data collection > Log methods].

Select the [Remote RS232-2] option and press the green checkmark to save the setting.

From the settings screen, navigate to [User settings > Data collection].

On the [Data collection] screen enable "Autostart", "Log by distance", and "Log by time".

Scroll down to [Logs interval].

Set [Logs interval] is set to "60 s".

From the Data collection screen, navigate to [Port settings > Remote port].

Set the [Baud rate] to "19200" and the [Data bits] to "8".

Press the green checkmark to save the settings.

The Epoke X1 controller is now configured to stream data to the IOX-WRKS.

Press the [Start/Stop] button to test for data.

Press the [Start/Stop] button to turn off once the verification is complete.