v1.7

Minor Versionm

by Alkesh Dhak

Dickey John Flex 4

Written By: Alkesh Dhak
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Sections

1

Video Overview

  1. The IOX-WRKS primary port connects to the GPS Receiver serial port on the Dickey John Flex 4 harness using the DB9 F-F Straight Through cable HRN-FLEX4. The IOX-WRKS primary port connects to the GPS Receiver serial port on the Dickey John Flex 4 harness using the DB9 F-F Straight Through cable HRN-FLEX4. The IOX-WRKS primary port connects to the GPS Receiver serial port on the Dickey John Flex 4 harness using the DB9 F-F Straight Through cable HRN-FLEX4.

    • The IOX-WRKS primary port connects to the GPS Receiver serial port on the Dickey John Flex 4 harness using the DB9 F-F Straight Through cable HRN-FLEX4.

    • Ensure the IOX-WRKS has the correct controller configuration loaded before proceeding to verification / simulation mode.

  3. Turn on the Dickey John Flex 4 controller and turn the Master Switch "off". On the main screen press [Material Select]. Then toggle [Manual Speed] from “Disable Manual Speed” to “Enable Manual Speed”. Press [Back] to return to the main screen.

    • Turn on the Dickey John Flex 4 controller and turn the Master Switch "off".

    • On the main screen press [Material Select]. Then toggle [Manual Speed] from “Disable Manual Speed” to “Enable Manual Speed”.

    • Press [Back] to return to the main screen.

    • Simulated speed will now be displayed on the main screen.

    • Turn the Master Switch "on',

    • Set [Spinner], [Conveyor] and [Liquid] to desired settings.

    • After the verification is complete, return the controller back to its original settings. Ensure that the [Manual Speed] setting is set to "Disable Manual Speed".

    • The Dickey John Flex 4 controller can also be placed into simulation mode by using a keyboard connected to the USB port on the control head.

    • Turn on the Dickey John Flex 4 controller and turn the Master Switch "off".

    • Press [F8] on the keyboard.

    • Press the [arrow key down] to "Manual Speed On" and press [enter]. Use the [arrow key] to navigate to “Yes” and then press [enter].

    • Press [F1] key to return to the main screen.

    • After the verification is complete, return the controller back to its original settings. Ensure that the [Manual Speed] setting is "Off".

    • Never leave a controller in simulation mode!

Finish Line

Author

Alkesh Dhak

Member since: 04/07/2022

39 Guides authored

Team

Authors: Field Service Install Member of Authors: Field Service Install

3 Members

41 Guides authored